Do you want imitation wood, or are you seeking solid wood? The majority of clients are unaware of the distinction. When a consumer sees the surface, it can occasionally be impossible for him to distinguish between the differences.
Thus, most wood floor installation services in Sherman Oaks do not get professional guidance until the installers get involved.
Usually, it is too late as they cannot do much when the material is unsuitable.
Original wood or replicas should be based on personal preference and cost, not objective factors. Therefore, the decision is simple if you are the kind of person who has no budget and is aware of the subtleties of using real wood flooring.
If you're the kind of person who likes to consider costs, carefully examining the product and its advantages can undoubtedly aid in your decision-making.
Here Are Your Options If You Want Real Wood Flooring?
Solid Wood
It is the best choice if you want solid wood flooring. There are different species of wood available in this single piece ( types of wood). For instance, Teak, Jatoba, Merbau, Ipe, and other types of wood.
However, keep in mind that this is real wood, thus after installation, there will always be some expansion and contraction of the wood.
Therefore, this is not what you need to look at if you want a wood floor installation service in Sherman Oaks to address your demands perfectly.
Additionally, installing such flooring often calls for a subfloor made of plywood that is 12 mm thick. So, remember that adding a floor to an existing floor is a letdown because the total height would be a little too high to tolerate.
These floorings are perfect if you're the type who loves wood and doesn't care if it moves slightly because you intended for this when you built your house or designed the interior!
Engineered wood surfaces
The greatest option if you want real wood but don't want to take a chance on solid wood flooring's behavior problems or don't have enough room (height) to install solid wood flooring is engineered wood flooring.
Engineered wood flooring is designed to be stable, as the name says! It consists of a real wood top layer that is typically 2-3 mm thick. It has a bottom layer of wood veneer and a middle layer of pine or spruce. This has a click lock and a three-layer construction. This makes it possible to install a floating floor (a floating floor is not fastened to the subfloor and permits movement of the wooden flooring).
Engineered wood flooring comes in a wide range of sizes and styles and is less expensive than solid wood flooring.
Veneered Engineered wood surfaces
Veneered engineered wood flooring is a cross between laminate flooring and engineered wood flooring.
The HDF (water-resistant) board that makes up the majority of the floorboard has a thin veneer pressed onto it at the top.
The click-lock floor planks typically have a total thickness of 8 to 10 mm.
Customers who desire natural wood on top, the stability of laminate flooring, and, of course, a lower price, may consider this flooring option.
You May Also Read: All The Information You Need To Refinish Engineered Hardwood Floors
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.